WHARTON CLOCKS - Network Versions - 4000N Series
The network versions offer simple, economical installation, using Network Time Protocol (NTP) Ethernet networking technology and RJ45 style connectors via an existing local area network and ensure access to the correct and legally-traceable time information. 4000N series clocks can be automatically synchronised via NTP from a local or internet time server with automatic seasonal time changes and programmable time-zone offset.
NTP is a time synchronisation protocol for inconsistent latency, packet-switched, computer networks. It abides by Coordinated Universal Time (UTC) standard.
The 4000 series clocks and calendar clocks provide a precise and elegant display of time, or time and date, using bright and clear LED characters with both manual and automatic brightness control for energy efficient use. The various display formats are available in a wide variety of sizes with character heights from 14mm to 220mm and suitable for use at maximum viewing distances from 3 to 100 metres. Some of the more popular types are held as stock items, but others are available to special order, on short lead time.
Additionally, the clocks may be used as stopwatch, programmable timer or up/down time counters when controlled with supplied infrared handsets or via network messages on N or NE versions.
Synchronisation and control
All may be used either as master clocks, as slave clocks controlled using a variety of network protocols or as stand-alone units, operating from their internal, high stability, quartz crystal oscillator.
N (Network) versions of 4000 series clocks and calendar clocks can be used as stand-alone, slave or secondary displays. They have a 10/100Base-T Ethernet NTP interface port and can be synchronised with a Wharton 5000 series or other local or remote NTP network time-server across a TCP/IP Ethernet network, see Wharton Clocks - NTP Time Servers - Ethernet - 5000 Series.
They can be configured, managed and updated remotely across the Ethernet TCP/IP network using the free Wharton cMon software. Fully automatic configuration is supported when used with a DHCP server with option 42 configured.
They can be used as master clocks - one clock can control up to 5 similar units.
The 4000 range clocks are supplied in cases suitable for surface mounting on a wall, flush mounting in a panel or with a mounting box for installation in a solid wall. Single and double sided ceiling suspended cases are available. Clocks may be supplied with different case colours and finishes to special order. Special outer cases, providing protection to IP65, can be supplied for use in difficult environmental conditions.
4000E versions are normally powered from an internal 110-230V 50-60Hz AC mains supply. The power lead has a UK plug. Power over Ethernet (PoE) is available as an option, as well. PoE operation powers the clock via the standard Cat-5 cable using IEEE 802.3af power injectors. Large clocks are supplied with 110-230V AC power supplies. PoE Midspan and Endspan support may be available (need to be specified when ordering). A non-rechargeable internal Lithium (Li) battery provides a standby supply to maintain the time-keeping in case of a power supply interruption for approximately 1 year and can be easily replaced. 24V DC operation is available as an extra cost option.
Calendar clocks can display the date using one, two or three selections from 21 languages. Catalan, Croatian, Czech, Danish, Dutch, English, Faroese, Finnish, French, Galician, German, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Slovene, Spanish, Swedish or Welsh. The clocks have the ability to display alternative languages sequentially automatically.
4000NE Network Enhanced Versions
4000NE versions of 4000 series clocks combine features of both 4000N (Network) and 4000E (Enhanced) versions. They are available to special order.
All Wharton products are available from Canford. If the item required is not in this selection, please contact Sales for assistance.