LANDE RACKS - Plinths, floor fixing kits, castors and levelling feet - For ES362 and ES462 Series

Plinths, floor fixing brackets, castors and levelling feet for use with Lande ES362 and ES462 Series cabinets

Plinths

Used to space the cabinet off the floor by 100mm, allowing access for cables through a brushed aperture at the rear, into the base of the cabinet when the cabinet is on a solid floor.

Floor Fixing Brackets

A set of two brackets, used front and back are positioned under the bottom frame of the rack and fixed from the inside, and can then be attached to the floor. Recommended with taller racks with heavy loads. Note that castors cannot be used when brackets are fitted to a rack.

Castors

A set of four castors, 2x braked, 2x un-braked, are fastened to an adapter plate which, in turn is bolted to the base of the rack. Fasteners included. Maximum load per set of four: 600kg. Note that castors cannot be used when floor fixing brackets or levelling feet are fitted to a rack.

Levelling Feet

PVC feet on threaded steel studs, to screw in the base of racks. Thread: 10mm. Maximum loading per set of four: 600kg, subject to load capability of flooring. Note that castors and levelling feet cannot be used together.

Note: ES362 and ES462 series cabinets are supplied fitted with heavy duty castors as standard, unless otherwise stated.