BUBBLEBEE LAV COVERS AND MOUNTS

LAV CONCEALER

Bubblebee’s Lav Concealer is available for a range of specific lavalier microphones including those from DPA, Rode, Sanken, Sennheiser, Shure and Countryman.

Manufactured from biodegradable, ‘soft-pliable’, 100% natural rubber, the lavalier microphone concealers have been designed to discreetly mount a microphone on clothing, such as a tie or shirt fastening, or collar. Along with inherent properties that protects the mic capsule from vibration, a wire fabric guard prevents the capsule from touching the fabric of the clothing to prevent unwanted noise resulting in ‘clearer sound recordings’. An included clip allows the user to mount from the front, back and top or bottom.

REGULAR SPARES set and TINY SPARES set are available for those looking to replace the metal clips and guards. ME 2-II SPARES set is a dedicated spares kit for the ME 2-II Lav Concealer. The spares sets do not include the rubber mount (Lav Concealer) or tape.

Compatibility

Single packs include: 1x Lav Concealer, 1x metal clothing clip, 1x Fabric Guard, 1x Extreme Fabric Guard, and 6x pieces of The Lav Concealer Tape. Metal clips and fabric guards are black or silver for the black or white Lav Concealers respectively.

Pack of 6 includes: 3x black metal clothing clips and Fabric Guards, 3x silver metal clip and Fabric Guards, 3x black Extreme Fabric Guards, 3x silver Extreme Fabric Guards, and 36x pieces of The Lav Concealer Tape.

MIC HIDING STARTER KIT

Bubblebee have designed this kit for those engineers who are looking for a variety of options without knowing which is best for their needs. The kit includes 3x Invisible Lav Covers Fur Outdoor (1x black, 1x white, 1x beige), 3x Invisible Lav Covers Original (1x black, 1x white, 1x beige), 9x Invisible Lav Covers Moleskin (3x black, 3x white, 3x beige), 15x Invisible Lav Tape, 5x Invisible Skin Tape, and 1x Accessory Case.

Note: The quantities listed above is per individual piece and not a multiple of the original pack quantity.

MIC HIDING KIT

Like the Mic Hiding Starter Kit, these Mic Hiding kits have been designed to have everything an engineer could need to mask a lavalier microphone, however these kits have been put together for specific microphone models.

BBI-MHK-ME2II for Sennheiser ME 2-II includes 1x BBI-LC-ME2II-BK Lav Concealer, 1x BBI-LC-ME2II-WH Lav Concealer, 6x Lav Concealer Tape, 5x Invisible Skin Tape, and 1x Accessory Case.

All other kits include 1x Lav Concealer in relevant specification and colour (black/white), 6x Lav Concealer Tape, 3x Fur Outdoor in relevant specification and colour (black/white), 6x Moleskin in relevant colour (black/white), 9x Invisible Lav Tape, 5x Invisible Skin Tape, and 1x Accessory Case.

Notes: The quantities listed above is per individual piece and not a multiple of the original pack quantity. Sennheiser ME 2-II refers to the more recent version with the permanently affixed pop shield - also known as ME 2

Compatibility

OUTDOOR MIC KIT

Outdoor Mic kits have been designed to have everything an engineer could need to reduce outdoor environmental noise being picked up by their lavalier microphone. The kits have been created to suit specific lavalier microphone models. The kits are available in black or white finishes, and include 1x Windbubble in compatible size and relevant colour, 2x Lavalier Mic Foam in compatible size and relevant, 1x Cable Saver in relevant colour, and accessory case.

Notes: The quantities listed above is per individual piece and not a multiple of the original pack quantity. Sennheiser ME 2-II refers to the more recent version with the permanently affixed pop shield - also known as ME 2

Compatibility

INVISIBLE LAV COVERS ORIGINAL

These 22 x 22mm black fabric pieces have been designed to stick directly on clothing or skin using the included hypoallergenic, double-sided tape mounts with each fabric piece capable of up to four applications. The adhesive tape must be replaced before each application. For optimal results the Invisible Lav Cover can be used to position the user’s lavalier microphone under clothing, under a collar, or on the chest, with the fabric piece covering the microphone to prevent any rustling noise.

Pack contains 9x reusable fabric pieces (3x black, 3x beige, 3x white), 30x Invisible Lav Tape mounts.

Dimensions (WxHxD): 22 x 22mm, fabric piece; 80 x 25 x 17mm, pack. Pack weight: 10g.

INVISIBLE LAV COVERS FUR OUTDOOR

Like the Invisible Lav Covers Original, the Invisible Lav Covers Fur Outdoor are designed to be used underneath clothing, sticking directly to the clothing or the skin using double-sided tape mounts. These lavalier covers have a dense fur finish that also eliminates wind noise and are therefore applicable for outdoor use as well as indoor. Each fur piece can be used up to four times, however the adhesive tape requires replacing upon every new application.

Pack contains 9x reusable fur pieces (3x black, 3x beige, 3x white), 30x Invisible Lav Tape mounts.

Dimensions (WxHxD): 22 x 22mm, fabric piece; 80 x 25 x 17mm, pack. Pack weight: 10g.

INVISIBLE LAV COVERS MOLESKIN

Like the Invisible Lav Covers Original, the Invisible Lav Covers Moleskin are designed to be used underneath clothing, sticking directly to the clothing or the skin using double-sided tape mounts. These lavalier covers are made from natural bamboo and are therefore a 'more eco-friendly' alternative to the Fur Outdoor and Original nylon alternatives.

Pack contains 30x moleskin pieces (10x black, 10x beige, 10x white), 30x Invisible Lav Tape mounts.

Dimensions (WxHxD): 22 x 22mm, fabric piece; 80 x 25 x 17mm, pack. Pack weight: 10g

INVISIBLE LAV COVERS BIG BAG

Available with Invisible Lav Covers Original, Invisible Lav Covers Fur Outdoor, or Invisible Lav Covers Moleskin, and in black, beige, or white finishes, these bulk bags offer a convenient way to store and transport spares. The reusable, zip-lock storage pouches are made from recyclable plastic. The Big Bags contain either 120 pieces of single use Moleskin Lav Covers, or 40 pieces of Orignal/Fur Outdoor Lav Covers are each can be reusable 3-4 times.

PIECE-A-FUR

Designed to be using in conjunction with the Invisible Lav Tape, this ‘thick, soft, and durable’ imitation fur is supplied in a large strip, allowing the user to cut pieces to the required dimensions before application.

Available in six colours including black, grey, white, off-white, brown, and beige, the Piece-A-Fur can be inconspicuous in placement whilst retaining wind noise reduction properties.

Dimensions (WxL): 360 x 110mm. Pack weight: 15g.

Variations

INVISIBLE LAV TAPE

Designed to be used with the Piece-A-Fur, these 22 x 22mm hypoallergenic, double-sided tape mounts are also compatible with the Invisible Lav Covers and Invisible Lav Covers Fur Outdoor. The tape is transparent and has a small piece cut out in the middle which can be saved and used for fixing. Bubblebee recommend that 'the tape must be replaced after each use'.

Variations

LAV CONCEALER TAPE, LAV CONCEALER TINY TAPE

These double-sided, hypoallergenic tape pieces have been designed to mount the Lav Concealer to either clothing or directly onto the skin. The tape pads can be used when it isn’t possible to use the metal clip of The Lav Concealer to mount. A thumb tab aids application by enabling the user to lift the tape from the backing. The box dispenser allows the user to release the tape pieces individually and ready to adhere to surface.

Variations

Bubblebee also manufacture other sizes and types of tape, See BUBBLEBEE ADHESIVE TAPES for details.