DPA MICROPHONES - Clips and Mounts

ADH0002

This is a double-sided tape that has been specially designed to be easy-to-use and reduce the time required to conceal a microphone. ADH0002 can be used to secure and hide miniature microphones on people, clothing and objects.

Packs available

ADH0005

A versatile, self-adhesive microphone mounting tape. ADH0005 is commonly used in the securing and hiding miniature microphones on people, clothing and objects. Pack of 50pcs.

SCM0001

Design for use with DPA 4660 series, heavy duty miniature microphones. This crocodile style, metal clip allows the user to mount a single microphone on the lapel or tie. The clip is finished in black.

SCM0004

SCM0004 small miniature clip is a ‘specially-designed’ clip for quick and easy chest mounting of DPA miniature microphones. Replacing the DMM0004, which does not fit the reinforced omnidirectional microphones, the holder is backwards compatible with the non-cable reinforced miniature microphones via an included sliced-cable relief. The mount is available in black (SCM0004-B) or white (SCM0004-W) finish. Also available in pack of 10x, see SCM0004-BX (black), or SCM0004-WX (white).

SCM0008

SCM0008 miniature clip is a double clip designed for quick and easy mounting of a lavalier miniature microphone on the chest of a speaker. When mounting a microphone on the two holes, cable noise is attenuated ‘dramatically’. The holder replaces the DMM00084, which does not fit the lavalier omnidirectional microphones. SCM0008 is backwards compatible with the non-cable reinforced lavalier miniature microphones via an included sliced-cable relief. The holder is available in black and white. Also available in pack of 10x, see SCM0008-BX (black)

SCM0017-2

Designed as a mounting clip for 40-series lavalier microphones, SCM0017-2 is an updated version of SCM0017 and features ribs un the underside of the mount to aid position retention. The clip can be used for either 4060 and 4061 lavalier microphones with both old or new strain relief, as can SCM0017, however DPA suggest SCM0017-2 will give optimal fit with the new type strain relief on these microphones. This holder is available in black (SCM0017-2-B) or white (SCM0017-2-W) finishes. Also available in pack of 10x, see SCM0017-2-BX (black), or SCM0017-2-WX (white).

SCM0018

SCM0018 is essentially the same as SCM0017, however having dual microphone holders attached side by side it is in effect 2x SCM0017 mounting clips. Compatible with DPA 4060 series lavalier microphones. Finished in black.

SCM0020

An improved clip for DPA’s 4660 series heavy duty miniature microphones. The holder is an alternative to the SCM0001 heavy duty clip. SCM0020 is ‘extremely easy to mount’ and ‘intuitive to use’. The clamping mechanism ensures quick and easy chest mounting of heavy-duty miniature lavalier microphone. The mic can be mounted in two ways using this clip. The clip is finished in black.

SCM0030

An 8-way, 360degree clip that allows the DPA 6060 series lavalier microphone to be mounted in eight positions, chosen in fixed 45degree incremental steps. This makes it very easy to change the mics from women’s to men’s shirts (left to right-buttoned), or even t-shirts and the like where the neckline is used. Available in black (SCM0030-B) or white (SCM0030-W) finish.

SCM0032

Designed for use when extra audio security and redundancy is required. SCM0032 double clip for DPA 4060 series miniature lavalier microphones offers a flexible and sturdy solution. Available in black finish.

SCM0034

When extra audio security and redundancy is required, SCM0034 double clip for subminiature lavaliers offers a flexible and sturdy solution. The 360degree clip allows the DPA 6060 series lavalier to be mounted in eight fixed positions, chosen in 45degree incremental steps. This makes it very easy to change the mics from women’s shirts to men’s shirts (left- to right-buttoned) or even t-shirts and the like where the neckline is used. Available in black finish.

SCM0035

A clip designed specifically for DPA 2061 series miniature lavalier microphones. Available in black or white versions, the clip offers 360degree rotation for best microphone positioning, and a cable management solution for more discreet placement. The mount features a non-slip surface for the fingers and for clothing. DUA0593 is a pack of 5x replacement/spare mic mounts for SCM0035 clip.

BLM6000-B

BLM6000 is a boundary layer mount that allows the versatility of a DPA lavalier microphone. The mount is manufactured from soft and durable rubber and has a diameter of 75mm. BLM6000-B has an underside cavity for mounting a single 4060, 4061, 4062 or 4063 microphone.

DMM0002

DMM0002-B miniature microphone holder with double pin has been designed for the quick and easy mounting of a lavalier miniature microphone onto the chest of a speaker. The double pin ensures maximum mounting stability and makes it possible to fit the microphone even on t-shirts and sweaters. Compatible with DPA 4060 series miniature microphones. Available in black (DMM0002-B) finish.

DMM0003

DMM0003 uses a strong magnet for mounting a miniature microphone on a speaker. The magnet mount is supplied together with a small iron tag on an elastic necklace for placing inside clothes behind the magnet. As the magnet is mounted on the microphone holder it is also possible to use the holder on all other magnetic surfaces. DMM0003 can carry up to two DPA 4060 series lavalier miniature microphones by their cables or one by the housing. Available in black (DMM0003-B) finish.

DMM0007

A universal surface mount which is manufactured from soft rubber. The holder can connect miniature microphones to numerous instruments, using a special non-marking adhesive. The adhesive tape allows the microphone to be placed at virtually any location on the musical instrument. This adhesive, while providing a firm location for microphone mounting, retains its ability to adhere through multiple uses. The mount is compatible with DPA 4060 series omnidirectional miniature microphones. The holder is supplied in a box with five holders and 20 pieces of adhesive tape.

DMM0011

Designed for DPA 4060 series miniature microphones, DMM0011-B is a strong magnetic microphone holder that can accommodate up to two lavalier microphones by their cables or one by the housing. It is suited for use on anything that is magnetic, such as a grand or up-right piano (in the frame) or drums with magnetic rims. Sold singularly. Finished in black.

DMM0014

This single clip is delivered as standard with 4080 miniature lavalier microphone. The mounting design features a ball-shaped fixation spot which allows the directional microphone to easily be turned in all directions. The clip fits both left and right-side buttoned shirts. To increase the system's immunity to cable noise, the clip features a short cable trail for securing the microphone cable.

DMM0015

This double clip is for mounting two 4080 microphones on a speaker - often implemented for redundancy. The rubber shock mount on the 4080 Miniature Cardioid Microphone can easily be dismounted from its enclosed standard clip (DMM0014) and attached to one of the ball-shaped fixation spots on the DMM0015 double clip. To increase the system's immunity to cable noise, the clip features a short cable trail for securing the microphone cable.

DMM0016

DPA DMM0016 for the 4080 lavalier microphone is a small holder with magnetic base. It is used to mount a single DPA 4080 microphone on a speaker by using the included small iron tag. The tag is on an elastic necklace for placement inside the clothing behind the magnet.

MHS6005

A pack of 5 pcs of soft rubber that can be used to attach a lavalier miniature microphone on a violin, viola, cello or double bass. The holder should be mounted between the tailpiece and the bridge. It can be turned upwards or downwards so that the mic will be placed either over or under the strings, depending on the desired sound colour or sound level. The lavalier miniature microphone is secured by its cable in a little clip, while the holder itself has a firm grip on two strings of the instrument with small hooks.

SM4080

This is a spare shock mount to replace worn or broken shock mount on DPA 4080 lavalier microphone. Sold individually.

G-MOUNT Gooseneck Mount

G-MOUNT replaces the previous rubber base on XX4099 clips. The gooseneck mount replaces two parts that were necessary to mount the 4099 (rubber mount and gooseneck lock) and features a two-step locking mechanism for effortless and precise gooseneck positioning with just one hand. To do so, the user opens the lever and seats the gooseneck in the clip. \then the lever can be closed and the locking mechanism is engaged by clicking the lever down, securely fixing the gooseneck’s position. G-MOUNT maintains full compatibility with existing clips: AC4099, DC4099, CM4099, CS4099 and UC4099
G-MOUNT can be purchased as a separate accessory, allowing you to upgrade your existing AC4099, DC4099, DM4099, CS4099 and UC4099 with this new improved mechanism. Also available in pack of 10pcs as G-MOUNTX

A-CLIP for Accordion

A clip designed to mount a DPA 4099 CORE+ instrument microphones, along with 4099 CORE mics; to an accordion. The mic clip can be attached permanently to the instrument using screws. The mic can be easily unclipped and repositioned or moved to another instrument whilst the mounting system is ‘designed to never blemish or scratch the finish’ of the instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

BC4099 for Bass

A clip designed to connect a DPA 4099 instrument microphone to an acoustic upright bass, allowing several placement possibilities. The mic attaches to the E- and G-string below the bridge ensuring mic placement in the sweet spot between the bridge and fingerboard. The microphone can be easily unclipped and repositioned or moved to another instrument. The mounting system is ‘designed to never blemish or scratch the finish’ of the instrument. Also available in pack of 10x, see BC4099X.

C-CLIP for Cello

A clip designed to connect a DPA 4099 instrument microphone to a cello. The clamp attaches to the C and A strings below the bridge allowing the placement of the microphone capsule in the sweet spot between the bridge and fingerboard. The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. Also available in pack of 10x, see C-CLIPX.

CM-CLIP Clamp Mount

CM-CLIP clamp mount has been designed to easily and quickly connect a DPA 4099 instrument microphone to many types of instruments, such as saxophones and brass instruments. The mounting mechanism makes it easy to move the mic between instruments with one hand. The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument.

D-CLIP for Drum

D-CLIP drum mic clip has been designed to connect a DPA 4099 instrument microphone to any type of drum. A ‘revolutionary’ 90degree system provides a wide range of mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90degrees, the number of mic positions is doubled. For the bass drum, the instrument VC4099 clip would be preferred for a better fir to the drum rim. The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. Also available in pack of 10x, see D-CLIPX.

GC4099 for Guitar

This clip is designed to connect a DPA 4099 instrument microphone to an acoustic guitar, mandolin, ukulele or dobro. It offers ‘practically unlimited placement possibilities’. The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. A flexible design supports a wide variety of mounting and positioning possibilities. Also available in pack of 10x, see GC4099X.

MS-CLIP for Mic Stand

MS-CLIP is a mic stand mount from DPA that can be used on both 3/8inch as well as 5/8inch threads, using the included insert. The clip features DPA's G-MOUNT mic holder, known from other DPA mounting options, makes it easy to insert and remove the microphone quickly and easily. In addition, the holder can be turned so the microphone can point vertically or horizontally, as the situation requires. The new G-MOUNT can be used on existing MS4099 units, but DPA do not recommend it as it offers limited functionality and a challenging replacement process

P-CLIP for Piano

P-CLIP is a magnet mount designed to place a 4099 instrument microphone onto a piano. The magnet mount provides stable and repeatable positioning, and the microphones clamphas 90-degree rotation and 45-degree incline for more precise positioning. The mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. P-CLIP mount can also be used with various instruments with magnetic surfaces. Also available in pack of 10x, see P-CLIPX.

STC4099 for Saxophone/Trumpet

Designed to connect a 4099 instrument microphone to a saxophone or trumpet, this mounting mechanism allows the user to move the microphone between instruments with one hand. The musician can use a mute together with the microphone clip and it remains easy to place your instrument in a stand with the mic and clip on. The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. A flexible design supports a wide variety of mounting and positioning possibilities. Also available in pack of 10x, see STC4099X.

U-CLIP Universal

U-CLIP universal mount has been designed to connect a DPA 4099 instrument microphone to slim bodied and unusually shaped instrument. The design of the microphone clip includes a hook-and-loop fastener strap which allows it to fit instruments of varying sizes and diameters such as the oboe, clarinet, bassoon, recorder, and flute. The fastener strap pulls tight to fit the circumference of the instrument, like a wristwatch on your arm. On instruments of a large diameter, additional fastener straps can easily be added to extend the clip’s reach. A 90degree system provides a wide range of mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90degree, the number of mic positions is doubled.

The mic can be easily unclipped and repositioned or moved to another instrument, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. A flexible design supports a wide variety of mounting and positioning possibilities. Also available in pack of 10x, see U-CLIPX.

VC4099 for Violin

A clip designed to connect a DPA 4099 instrument microphone to a violin, viola, banjo, or mandolin. The mounting mechanism makes it easy to move the mic between instruments with one hand, whilst the mounting system is ‘designed to never blemish or scratch the finish’ of your instrument. A flexible design supports a wide variety of mounting and positioning possibilities. Also available in pack of 10x, see VC4099X.

G-EXTENSION Gooseneck Extension

This gooseneck extension is specifically designed to be compatible with all DPA 4099 microphone solutions. It adds an additional 80mm of length so you can position the microphone slightly further off the instrument. G-EXTENSION is terminated with MicroLock connector.

CSM4000 Compact Shock Mount

CSM4000 compact shock mount, also known as ‘the radiator mascot’, is a shock-mount designed for rubber suspension of pencil microphones with MMP-ER/ES or MMP-GR/GS preamplifiers on standard microphone stands, TB4000 table base, or MB4000 magnet base.

The soft rubber mount provides efficient absorption of vibrations that might occur during use. It is fitted with one DDS0019 rubber mount for 19mm diameter microphones as standard, however it can also be fitted with rubber mounts for both 11-13mm diameter and 16mm diameter microphones. A ‘robust’ plastic ring offers excellent protection of the microphone if used in more testing applications, for example, on a drum kit.

CSM4000 compact shock mount is fitted with a thread adapter which allows it to be used on up to three of the most popular international standard threads used on microphone stands.

Note: CSM4000 is not compatible with the DPA 4017 shotgun microphone.

UA0897 Shock Mount

UA0897 shock mount is designed for use in environments where vibration levels are unusually high. It's compact design significantly reduces the amount of vibration that reaches the mic. The shock mount was designed using modern vibration measuring techniques using Brüel & Kjær's world famous vibration test equipment. Unlike other shock mounts, the vibration reduction is clearly specified. UA0897 can be used stand mounted in the studio or in hand-held boom applications.

UA0897 is supplied as standard with a rubber mount for 19mm microphones.

CXO4000 XY/ORTF Stereo Holder

CXO4000 compact XY/ORTF stereo holder allows the mounting DPA pencil microphones with MMP-ER/ES or MMP-GR/GS preamplifiers in both a coincident XY stereo configuration as well as in a near-coincident ORTF combined time and intensity difference stereo configuration. Two hooks in the middle of the stereo holder are for XY stereo, while the two hooks on the side are for ORTF stereo. It is possible to use both stereo setups simultaneously in order to compare afterwards in the editing process. The user can also use the holder to record in surround sound using one front and one back-orientated stereo setup.

This lightweight holder is a convenient and practical tool for mounting pencil microphones on a single microphone stand so they take up very little space. CXO4000 is manufactured from black anodized aluminium and ethyl propylene rubber rings to ensure durability and stability. For flexibility, the holder also includes a thread adapter for attachment to most common microphone stands.

Note: CSM4000 is not compatible with the DPA 4017 shotgun microphone.

SM1500 Double Pole Shock Mount

This shock mount uses a double-pole construction on an adjustable microphone stand base. Both omnidirectional and directional microphones, compact as well as larger, are compatible with this mount. It is an especially important piece of gear when using pressure gradient (directional) microphones, which need extra suppression of vibrations.

Almost any microphone can be used in this shock mount by simply adding another Lyre rubber piece, with softer rubber used for lighter microphone. The design of this shock mount ensures the holders can be mounted facing both upwards or downwards. The poles can be adjusted by pushing to one side or the other.

SM4000-C Suspension Mount

This is an optional accessory for all short pencil microphones that have an MMP-C, MMP-E or MMP-G preamp. By wrapping the coil around the cable of the microphone preamp, the mount allows the microphone to be hung from the ceiling or the like and be oriented in any direction desired, just by bending the holder. SM4000-C is compatible with DPA 4007 (12mm), and DPA 4015 microphones.

UA0639 Microphone Clip

This microphone clip is based on a traditional design, but with additional modifications resulting in a tighter and firmer grip on the microphone. The clip has been designed with compatibility for all DPA pencil recording microphones and other microphones with 19mm diameter housings. Available in black finish.

UA0961 Microphone Clip

This microphone clip fits all DPA large diaphragm and standard pencil microphones or other mics with 19mm housing. The clip has a unique design, which ensures that the microphone is held securely at all times. It is best suited for use in permanent or semi-permanent set-ups, where the stability of the microphone is of important.

SBS0400 Stereo Boom

This lightweight stereo boom with shock mounted microphone holders, addresses the need for quick, precise, and repeatable ways to switch between AB, XY, ORTF and DIN stereo principles. The shock mounts included in this solution hold both omnidirectional and directional microphones, compact as well as larger. Additional holders can be attached to it for mounting more than two microphones.

Markers indicate parallel microphones positioning plus 90degree and 110degree offset for XY an ORTF configurations. A central base with a rotary joint allows the microphones to be angled equally. The stereo boom has hooks for suspending the boom in wires. The boom measures 40cm in length.

UA0836 Stereo Boom

UA0836 stereo boom is a ‘precision-crafted’ microphone boom for secure mounting of microphone pairs for A-B stereo recordings. It allows the user to adjust both microphone spacing and microphone angle. The boom can be mounted on a stand or suspended from wires. There are centimetre graduations marked on the boom, and angle graduations on the microphone holder for quick and easy configuration of the recording set-up. Boom length: 54cm.