ULXD4 Single channel
One of three receivers in the ULX-D range, ULXD4 is a desktop, single channel receiver that can be mounted in a 1U, 19-inch format by using the included mounting bracket kit. The user can operate up to twenty-two compatible systems, in standard mode, or up to sixty-three compatible systems in high density mode – all within one 8MHz channel. Features such as over 120dB dynamic range and 24-bit/48kHz digital audio conversion, and interference detection and alert setup are included on the ULXD4 receiver. ‘Digital Predictive Switching Diversity’ aids smooth reception by silently switching to the best signal between receiving antenna, whilst the cleanest frequencies are automatically found, prioritised, and implemented when setting up a new channel.
The ULXD4’s front facing panel has visual aids to monitor RF on both channels A and B, audio input including overload, and menu/parameter setup via an LCD panel. Power button, control knob, menu buttons, and gain up/down control buttons are also located on the front facing panel, along with an infrared port for syncing with selected transmitter.
The rear facing panel of the receiver houses all audio and data connectivity including BNC connectors for antenna A and B, 15V DC power supply input, Ethernet port with associated LED for status, and audio output on balanced 3-pin XLR with mic/line level selection via switch, or 6.35mm jack line level output. The Ethernet port allows connection to Shure’s Wireless Workbench software with compatible computer, whilst AMX and Crestron control system compatibility is also standard. Rack mounting fixing is provided to fit 19-inch racking.
Audio frequency response: 20-20kHz. Latency: less than 2.9ms. Dynamic range: greater than 120dB, analogue; 130dB, Dante digital. Audio output: balanced 3-pin XLR, -6dB, mic; +24dB, 3-pin XLR line; +18dB, 6.35mm line output. Networking: single port Ethernet 10/100Mbps. Network addressing: DHCP or manual IP address.
ULXD4D Dual channel
ULXD4D has all the functionality and specifications as the ULXD4 receiver, however it is doubled in terms of channels and is powered via 100-240V AC via IEC power inlet. ULXD4D also has both primary and secondary network connections.
Dimensions (H x W x D): 44 x 482 x 274mm. Weight: 3.36kg, without antenna.
ULXD4Q Quad channel
ULXD4Q has all the functionality and specifications as the ULXD4 receiver, however it is quadrupled in terms of channels and is powered via 100-240V AC via IEC power inlet. ULXD4Q also has both primary and secondary network connections.
Dimensions (H x W x D): 44 x 482 x 274mm. Weight: 3.45kg, without antenna.
ANX4 Scalable
Compatible with the ULXD series of Shure wireless systems, along with Axient Digital series, ANX4 has been described as 'the ultimate high-tier, high-channel-count wireless receiver'. Having a large tuning range covering 174MHz to 2GHz, Shure ANX4 receives up to 16-channels of Shure Axient Digital, or 24-channels of Shure ULX-D wireless audio in a single rack space. Note: ANX4 cannot support both ULX-D and Axient Digital system simultaneously, and system features are dependent on the activated transmission mode. A 6.6-inch front panel colour display illustrates important information including channel RF, audio input, and count at a glance. A user menu can be navigated using the main jog wheel and accompanying selection buttons. Shure ANX4 can be purchased in either AC mains version (ANX4UK), or DC power (ANX4UK-DC) version to support redundant power.
ANX4 does not ship preconfigured with active wireless channels, affording the user the opportunity to purchase channels in single- and four-channel increments and activate the exact number of channels required. Licenses can be activated in one ANX4 and later removed and activated in a different ANX4 as needs change. ANX4 channel licenses are perpetual licenses, not subscription-based licenses, and can be managed via the user's ShureCloud account. All the features found in Axient Digital and ULX-D receivers are available in the ANX4, and with a 1U rackmount format, streamlined antenna configurations for large channel count environments can be achieved.
License options
Included accessories: 1x rackmount kit, 1x long Ethernet cable, 1x short Ethernet cable, 2x BNC cables, 2x BNC bulkhead adapters.
Power requirements: 100-240V AC, 1.4A maximum, AC; 11.3-16V DC, 10A maximum. Dimensions (H x W x D): 44 x 482 x 286mm. Weight: 3.9kg.