LYNX YELLOBRIK OET 1514 FIBRE TRANSCEIVER Bidirectional Ethernet to fibre, singlemode LC

OET 1514 - Ethernet to Fibre Transceiver (switch)

OET 1514 is a compact three-port ethernet switch, designed to extend the reach of electrical ethernet signals over long distances using a constant (fixed) high speed 1 Gbit/s optical transceiver speed. When paired with another OET 1514 at the receiving end (using two fibre links) the result is a cost effective Ethernet extender system for distances up to 10km providing a stable, high speed 1Gbit/s error free optical connection between locations. OET 1514 has two standard RJ45 electrical ethernet ports plus fibre I/O and functions as a 3 port ethernet switch. For legacy system use: each electrical ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10Mbit/s, and each port can use auto crossover detection or be forced manually if needed. These functions are available using the dip switch. Power: +12V DC at 1.9W nominal. Dimensions (LxWxH): 140 x 42 x 22mm. Weight: 125g.

Included accessories: SFP module, AC power supply.

Versions available

OET 1910 - 10Gbit/s Ethernet to Fibre Transceiver

OET 1910 is a compact electrical ethernet to fibre optic converter, designed to extend the reach of 1Gbit/s or 10Gbit/s electrical ethernet networks over long distances. When paired with another OET 1910 (using two fibre links) you have a simple cost-effective ethernet extender solution for distances up to 20km providing a stable, high-speed optical ethernet connection between locations.

Included accessories: 2x SFP module, AC power supply.

Versions available

OBD 1514 E - Bidirectional Ethernet to Fibre Transceiver (switch)

OBD 1514 E is a matched pair of compact ethernet switches designed to extend the reach of electrical ethernet signals over long distances. The two switches are linked via single bidirectional fibre link which operates at a constant 1Gbit/s speed. The pair of modules uses WDM (Wavelength-division Multiplexing) fibre technology in a closed loop arrangement and essentially functions as an Ethernet extender solution. The fibre link supports distances up to 10km and provides a single, high speed 1Gbit/s error-free optical connection between the two locations.

Each OBD 1514 module has two standard RJ45 electrical Ethernet ports and the complete system functions as a 4 port ethernet switch, providing two standard RJ45 ethernet ports at each location bridged with fibre. For legacy systems, each electrical ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10Mbit/s. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch. Note: This system uses WDM and should only be used in point to point applications. WDM cannot be integrated into a CWDM system.

Included accessories: 2x SFP module, 2x AC power supplies.

OBD 1910 - 10Gbit/s Ethernet to Fibre bidirectional Transceiver

OBD 1910 kit is a simple, easy to use, plug and play solution which can extend a 1Gbit/s or 10Gbit/s electrical Ethernet network up to 30km over a single fibre link. Usually 2 fibre links are needed between locations (TX and RX) but the OBD 1910 uses WDM multiplexing to use a single bidirectional fibre link (singlemode fibre).

The kit includes 2 modules and 2 power supplies. No complex configurations or set ups needed. The modules will support 1Gbit/s and 10Gbit/s Ethernet networks with a maximum throughput of 20Gbit/s (full duplex) If your current network infrastructure is using multimode fibre in each location, then you are limited on connectivity distance. If you need to extend this multimode network over a long distance to another location, then we have the OBD 1910 MM version of the kit, which will convert the dual multimode RX and TX connections into a single bidirectional link using singlemode fibre.

Included accessories: 4x SFP module, 2x AC power supplies.

Versions available

ODT 1540 - RS232/422/485 and GPI Fibre Transceiver - CWDM

ODT 1540 is a multi-function module which, when used with another ODT 1540 in the remote location, will extend the reach of a serial connection, as well as two GPI, general purpose interface, circuits, up to 40km over two fibres. A single RJ45, electrical, serial connection can be configured for RS232, RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same duplex fibre link. The ODT 1540 is 'completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting)'.

The integrated DIP switch provides control over the serial mode of operation, with selection of the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors. The ODT 1540 also supports 'mixing and matching of serial standards'. For example, the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output. The ODT 1540 is '100 percent plug and play, hot pluggable and no special software drivers are required'.

Serial connections: EIA/ETA RS232C / RS422 / RS485, RJ45.
Max electrical nodes for RS422/485: 25 (ESD protection for up to 26kV)
GPI connections: 2x inputs, 2x outputs per module
GPI inputs: External passive closure between pins (short) to trigger, maximum input switching frequency 25Hz (50 operations / second).
Input insulation: 3.75kV
GPI outputs: Internal contact closure (relay), maximum switching frequency 25Hz (50 operations / second), maximum switching power 220 VDC, 0.25A or 250V AC, 0.25A.
Output insulation: 3.75kV

Included accessories: AC power supply. Note: SFP module not included.

Compatible SPF modules

OH-TR-54-XXXX-LC

OET 1544 - Ethernet to FibreTransceiver (switch) - CWDM

OET 1544 is a compact three-port Ethernet switch, designed to extend the reach of electrical Ethernet signals over long distances using a constant (fixed) high speed 1Gbit/s optical transceiver speed. When paired with another OET 1544 at the receiving end, the wired Ethernet signal can be extended over distances up to 40km using two fibre links. The fibre port is fully IEEE 802.3z compliant, so a single OET 1544 can be combined with any IEEE compliant switch or network adapter provided that the equipment interface supports the fibre type, and the transmit and receive wavelengths.

The modules have two standard RJ45 electrical Ethernet ports and a duplex fibre port; they are three-port devices. However, when a pair are connected together by a duplex fibre connection, the combined pair act as a four-port Ethernet switch. Each electrical Ethernet port can be set for automatic speed detection, 10, 100, 1000Mbits/s or forced to 10Mbits/s and each port can use auto crossover detection or be forced manually if needed. These functions are available using a DIP switch. LEDs indicate port speed and activity for the electrical ports and TX, RX active for the fibre port.

Included accessories: AC power supply. Note: SFP module not included.

Compatible SPF modules

OH-TR-58-XXXX-LC
OH-TR-54-XXXX-LC