Designed with ease of use, and efficiency in design in mind, this selected range of Point Source Audio headset microphones offers a great choice for active speakers or performers that require the comfort and confidence in a dual ear mount system.
All headsets below house microphone elements with option of omnidirectional, cardioid, or dual-capsule. The ear hooks fold flat for protection in storage and travel whilst also having the ability to reverse for left or right ear wearing to accommodate any mic user or production requirement.
Series8 microphones
Point Source Audio Series8 headworn microphones include an interchangeable X-Connector termination type with compatibility for the most popular wireless microphone systems listed. For any other X-Connector type, please contact our Sales Team.
CO-8WD Omnidirectional
CO-8WD is a fully integrated, dual-ear mount headset microphone that provides the user with confidence in fitting and microphone placement. With a maximum SPL of 136dB SPL and 4mm microphone element with omnidirectional pattern, the microphone allows a natural vocal sound well suited in low to moderate noise environments. CO-8WD is IP57 rated and is available in black, beige or brown finish.
Included accessories: 1x Specified X-Connector, 1x WSN windscreen, 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Omnidirectional. Frequency response: 20Hz to 20kHz. Sensitivity: -43dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 136dB SPL. Output impedance: 1400ohms, at 1kHz. Cable length: 1.22m, excluding X-Connector.
CR-8D is a cardioid dual ear headset microphone designed for applications when there is more than one microphone being used in close proximity. Often employed in live performances and in some recording situations where feedback may be an issue, the cardioid microphone picks up a focused sound from one direction compared to an omni that picks up from several directions. CR-8D is available in black, beige or brown finish.
Included accessories: 1x Specified X-Connector, 1x WSN windscreen, 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Cardioid. Frequency response: 160Hz to 14kHz. Sensitivity: -50dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 135dB SPL. Output impedance: 1700ohms, at 1kHz. Cable length: 1.22m, excluding X-Connector.
CO2-8WD Dual capsule, omnidirectional
This headset has been designed with redundancy in mind. The headset microphone's patent pending design offers two microphone capsules built into a single frame with single cable. The cable splits approximately 23cm above connection to the body-packs to allow ample room for separation of the transmitters. Alternatively, the user can employ the BBX Backup Box to merge signals into a single transmitter pack to offer microphone redundancy only. The two omnidirectional elements are factory matched to +/-0.5dB difference - and both elements are IP57 waterproof rated. The microphone elements are offset to reduce mass and offer a sleek profile. Available in black, beige or brown finish.
Included accessories: 2x X-Connectors, 1x WSNx windscreen, 1x B-Clip cable clip.
Element: 2x Back electret condenser, matched. Pattern: Omnidirectional. Frequency response: 20Hz to 20kHz. Sensitivity: -43dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 136dB SPL. Output impedance: 1400ohms, at 1kHz. Cable length: 1.22m, excluding X-Connectors.
CX2-8D Dual capsule, omnidirectional/cardioid
Sometimes referred to as 'Omnoid', CX2 is a dual-capsule microphone with omnidirectional and directional capsules to offer simultaneous user or to offer multiple pickup types to address a host of audio scenarios. Often employed in live sound application, this microphone allows the engineer to switch between audio signals for the cleanest result. It is also a feature that can be employed for separate feeds whereby one is required for live sound output and the other for streaming or back up recording. Available in black, beige or brown finish.
Included accessories: 2x X-Connectors, 1x WSNx windscreen, 1x B-Clip cable clip.
Element: 2x Back electret condenser. Pattern: Omnidirectional/cartdioid. Frequency response: 20Hz to 20kHz, omni; 160Hz to 14kHz, cardioid. Sensitivity: -43dB, omni; -50dB, cardioid 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 136dB SPL, omni; 135dB SPL, cardioid. Output impedance: 1400ohms, omni; 1700ohms, cardioid, at 1kHz. Cable length: 1.22m, excluding X-Connectors.
Series9 microphones
Point Source Audio Series9 microphones have been designed to off a high maximum sound pressure level whilst being durable and for applications including live and studio use. Unlike Series8 microphones which employ the X-Connector termination, Series9 microphones are terminated with either 'SE' 3.5mm locking jack, 'SK' 3-pin lemo, or 'SH' TA4F patented ENDURE connector - that has been tested to 12,000 bends. The microphones allow cleaning with isopropyl alcohol and have IP57 rating.
GO-9WD Omnidirectional
GO-9WD is a fully integrated dual-ear headset microphone designed to meet the demands of professional users. With a maximum SPL of 142dB, the microphone can handle loud vocals without clipping or producing a harsh, distorted sound. A sensitivity of -39dB 1V/Pa at 1kHz ensures clarity, capturing delicate nuances in the voice. Additionally, the GO-9WD includes Point Source Audio's patented ENDURE connector for enhanced durability. Available in black, beige, or brown finish with 3.5mm locking jack, TA4F, or 3-pin lemo termination. Other terminations are available by request.
Included accessories: Windscreen, cable clip.
Element: Back electret condenser. Pattern: Omnidirectional. Frequency response: 20Hz to 20kHz. Sensitivity: -39dB 1V/Pa, at 1kHz. Maximum SPL: 142dB SPL. Output impedance: 1300ohms, +/-30%, at 1kHz. Cable length: 1.7m.
GO2-9WD Dual capsule, omnidirectional
GO2-9WD has the same specifications and characteristics as GO-9WD however the headset frame houses dual omnidirectional capsules for redundancy. Available in black, beige, or brown finish.