COVID-19: Canford bliebt weiterhin offen. Da die meisten unserer Büromitarbeiter von zu Hause aus arbeiten, kontaktieren Sie uns bitte, wenn möglich, per Email. Webbestellungen werden wie üblich verarbeitet.

Verkauf : +44 191 418 1198         Email :

  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM

GLENSOUND DANTE MICROPHONE AMPLIFIERS - Dark Series

This is a range of Glensound microphone/line level amplifiers, designed with compatibility to Dante/AES networks. Designed for use in broadcast environments these interfaces are manufactured in rackmount or desktop varieties.

DARK8MAI MKII 8 input mic/line amplifier - desktop

Glensound DARK8MAI MKII is an analogue to digital converter designed to connect mic/line level analogue audio circuits to a Dante/AES67 audio network, and has eight low noise mic/line inputs which are remotely controlled by the GlenController Windows 10 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante/AES67 network interface.

DARK8MAI MKII has 8 audio inputs, with each input on its own Neutrik 3-pin XLR socket, and each input able to accept line or mic level inputs with switching to suit. Internal circuitry changes the input impedance to correctly match the input type. The unit can be powered from two independent sources to provide a redundant power option. Each of the two copper network connections accept a PoE power source, allowing suitable network switches to provide power and data connectivity to the unit. This means that just one cable can carry power and audio date to/ from the unit

Twelve fixing slots, positioned on the top and bottom aluminium plates can be used for fixing the unit in place either temporary using cable ties or straps or permanently with screws. The front facing panel shows the eight analogue mic/line audio inputs. The microphone input has the ability to switch 48 volt phantom power on/off. Input selection and phantom power settings can be enabled on GlenController.

The rear panel of the unit has four network interfaces. There are 2x Neutrik Ethercon (RJ45) connectors, and also 2x SFP slots to fit preferred fibre interfaces. One blue identify button, one DC input, which is only needed if no PoE available; and one reset and USB connection used for firmware updates.

GlenController provides full remote control of the DARK8MAI MKII, allowing the switching of the input types, gain control, level monitoring and more. GlenController also gives the functionality of connecting multiple DARK8MAI MKII units, along with multiple instances running on different PCs connecting to a single DARK8MAI MKII. For users regularly using the units at different events and functions settings can be saved, and assigned names for quick recall and imported/exported between different units.

Line inputs frequency response: 20Hz to 22kHz, +/-0.25dB. Maximum input level: +18dB. Input impedance: greater than 20kOhm. Distortion: 0.0013%, at 100Hz; 0.0022%, at 1kHz; 0.00094%, at 10kHz, reference to +8dBu output. Noise: -93dB, at line up, A weighted. Inter-channel crosstalk: greater than 101dB, at 0dB with 1kHz tone. Dynamic range: greater than 111dB. Input type: Electronically balanced, can be wired unbalanced. Mic input frequency response: 40Hz to 22kHz, +/-0.25dB. Input range: -67 to -15dB, for -24dBFs line up; -61 to -7dB, for -18dBFs line up. Input gain resolution: 3dB steps. Input impedance: greater than 2k4Ohm. Equivalent input noise: 22Hz – 22kHz, 127dB, terminated 300Ohms. Distortion: 0.013%, at 100Hz; 0.002%, at 1kHz; 0.003% at 10kHz. Phantom Power: +48 Volts. PoE inputs: 2x standard 48V, one on each network RJ45. PoE Consumption: less than 15Watts. External DC input: +12V DC. Connector: Barrel connector, centre +Ve. Network/Dante interface: 2x RJ45, 2x SFP Slots. Audio Sample Frequency: 32 to 192kS/s. Transfer rate: 1000Mbps. Dante chipset: Brooklyn II, AES67 Compliant. Dimensions (HxDxW): 59 x 157 x 238mm. Weight 1.2kg

Included Items: 1x 2m RJ45 cable and handbook.

DARK8MAIR 8 Input mic/line amplifier - rackmount

Glensound DARK8MAIR is a 19-inch, 1U rackmount analogue to digital converter designed to connect mic/line level analogue audio circuits to a Dante/AES67 audio network. It has eight low noise mic/line inputs which are remotely controlled by GlenController, a downloadable Windows 10 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante/AES67 network interface.

DARK8MAIR can be powered from two independent sources to provide a redundant power option. Each of the two copper network connections accept a PoE power source, allowing suitable network switches to provide power and data connectivity to the unit. This means that just one cable can carry power and audio date to/ from the unit.

The front panel of the DARK8MAIR shows four available power LEDs. These indicate when a suitable power source is attached and turned on. The rear facing panel shows the eight analogue mic/line audio inputs. Each of the eight inputs can be individually switched to accept either mic or line level input. The mic input can also have +48 volt phantom power turned on/off with input selection and phantom power settings are enabled/disable within GlenController. There are two Neutrik RJ45 Ethercon connectors, along with two SFP slots to fit preferred fibre interfaces for the network connection.

GlenController is a Windows 10 app that provides full remote control of the DARK8MAIR. It allows switching of the input types, gain control, level monitoring and more. GlenController can connect to multiple DARK8MAIRs, or multiple instances running on different PCs can connect to a single DARK8MAIR. For users regularly using the units at different events and functions settings can be saved, and assigned names for quick recall and imported/exported between different units.

Frequency response: 20Hz to 22kHz, +/-0.25dB. Maximum input level: +18dB. Input impedance: greater than 20k Ohm. Distortion: 0.0013%, at 100Hz; 0.0022%, at 1kHz; 0.00094%, at 10kHz, reference to +8dBu output. Noise: -93dB at line up, A weighted RMS, 22Hz to 22kHz. Inter-channel crosstalk: greater than 101dB, at 0dB with 1kHz tone. Dynamic range: greater than 111dB. Input type: Electronically balanced, can be wired unbalanced. Mic inputs frequency response: 40Hz to 22kHz, +/-0.25dB. Input range: -67 to -15dB, for -24dBFs line up; -61 to -7dB, for -18dBFs line up. Input gain resolution: 3dB steps. Input impedance: greater than2k4 Ohm. Equivalent input noise: 127dB, 22Hz – 22kHz, Terminated 300 Ohms. Distortion: 0.013%, at 100Hz; 0.002%, at 1kHz; 0.003%, at 10kHz, reference to + 8dBu output. Phantom power: +48 Volts. PoE Inputs: 2x standard 48V, one on each network RJ45. PoE consumption: less than 15Watts. Weight: 1.9kg.

Included Items: 1x 2m RJ45 cable and handbook.

DARK1616M 16x16 mic/line-level and AES

The Dark1616M is a dedicated, rack-mounting, Dante Ethernet interface, designed for use in demanding broadcast environments. It has sixteen inputs and outputs available in parallel as both analogue and digital formats. Analogue balanced inputs may be selected to microphone, microphone with 48V phantom power or line-level, with analogue outputs available as line-level only. Digital inputs and outputs are offered as eight AES inputs and outputs (sixteen digital channels). It can be used as a stand-alone interface into a Dante network or in conjunction with a second, directly-linked, Glensound interface as an audio 'snake', or used as the network-connected or point-to-point interface to Glensound's Dante commentator units.

It has both redundant network cable connections and redundant power supplies for extra resilience, and has redundant SFP slots, providing the option to use multimode, single-mode or single-core fibre connections for additional range. It is compatible with Glensound DARK series or AoIP44 Dante interfaces when directly connected as a 'snake'. Dante is a software and hardware solution, offering high-performance audio distribution over standard IP networks, supporting hundreds of simultaneous channels of uncompressed audio with low latency and accurate synchronization. For further information, see Dante Networking Basics. In a Dante network, the Dante Controller web interface controls audio routing. Any Dante input can be routed to any other output on the network, or to multiple network output points.

The four network connections of the Dark1616 can be configured as a switch. In this configuration, if the primary and secondary redundant SFP/fibre slots have been used as the network link, the RJ45 connections can be used to loop out to further local DARK units or other Dante devices that will all be shown separately on the network within the Dante Controller configuration utility. The DARK1616M contains a web server, 'allowing remote functionality to an engineer from any PC connected to the network via any web browser'. Remote control of the input switching (microphone / microphone with 48V phantom/line), input gain and microphone on/off is available. Network settings can be configured.

The front panel of the 1U high, rack-mounting chassis has eight LEDs to indicate the status of the DARK1616Ms primary and secondary redundant systems. PSU1, PSU2, primary link, and secondary link all have indicators to show either normal or fault mode. A nine-pin, D-sub connector is used to relay any fault information via GPO. This can be used to trigger alarms on other systems in the event of link or power supply failures.

A mini-B USB socket allows connection to a PC for performing firmware updates, in conjunction with 'Identify' and 'Update' buttons. Two SFP slots are provided to take optional primary and secondary SFP fibre interfaces for the network connection. Two Ethercon sockets provide primary and secondary copper Ethernet connections.

The rear panel contains six 25-pin, D-sub connectors. Two of these are for the AES input/outputs, AES 1-4 and AES 6-8. Two are for the analogue inputs, analogue in 1-8 and analogue in 9-16. The final two are for the analogue outputs, analogue out 1-8 and analogue out 9-16. All analogue and AES outputs are always available. On the inputs, any valid AES signal will have priority over the analogue inputs. Two IEC power inlets feed the main and secondary redundant power supplies.

Microphone level inputs: -67dBu to -15dB dBu, for-24dBFs line up, -61dBu to -7dBu, for -18dBFs line up, 2400 ohms. Input gain resolution: 1dB steps. Response: 40Hz to 22kHz, +/-0.25dB. Distortion: 0.002% THD, 1kHz. Noise: -127dB EIN, 22Hz-22kHz, terminated 300 ohms. Phantom power: +48 volts. Line level analogue audio: +18dBu/+18dBu, maximum, input/output, 20k ohms / 50 ohms impedance, Distortion: 0.0022% THD at 1kHz, referred to +8dBu output. Noise: -93dB at 'line up', RMS, A-weighted. Dynamic range: 111dB. Inputs and outputs are electronically balanced and can be wired unbalanced. Digital audio: AES3. Response: 'Flat to 22kHz'. Maximum levels: 0dBFs, inputs and outputs, 110 ohms. Distortion: 0.00018% THD+N. Noise: -123dB RMS, A-weighted, residual. Inputs and outputs are transformer balanced. Dynamic range: 141dB. Input frequency: 16-192kHz (sample rate converted to meet Dante network frequency). Output frequency: 44.1, 48, 88.2, 96, 192kHz (output matched Dante network). Power source: 2x AC inputs,100 - 240V AC, 47-63Hz; 18W at 230V AC. Dimensions: Rack mounting, 1U x 300mm deep excluding connectors. Weight: 3.3kg.

Included accessories: 2x power cables, with UK 13A connectors.
Optional accessories: Dante/SFPS, Dante/SFPM, Dante/SFP1, and Dante/SFP2.

  Bezeichnung Preis €
zzgl. MwSt.
Hinzufügen
Versand
GLENSOUND DARK8MAI MKII MICROPHONE AMPLIFIER 8-input, mic/line, Dante/AES67, desktop   Artikelnummer: 95-8998
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
1.265,00 €
GLENSOUND DARK8MAIR MICROPHONE AMPLIFIER 8-input, mic/line, Dante/AES67, 1U rackmount   Artikelnummer: 95-8999
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
1.380,00 €
GLENSOUND DARK1616M DANTE INTERFACE 16 in, 16 out, balanced microphone/line-level and AES audio   Artikelnummer: 95-8974
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
2.760,00 €