Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM
CANFORD FLOOR BOX
CANFORD FLOOR BOXCANFORD FLOOR BOXCANFORD FLOOR BOX Angled four universal socket plateCANFORD FLOOR BOX Mains socket plate (with sockets)CANFORD FLOOR BOX Angled two universal socket plate (end positions)CANFORD FLOOR BOX Blank plate

Heavy duty steel floorbox (also known as a ‘Stage Dip Box’) for recessed mounting into solid and wood floors. The top half of the box has an upper lip, which rests on or flush with the floor surface. It is finished in grey stove-enamel with grey moulded plastic lip. The bottom section has adjustable flanges for bottom fixing below the floor surface (removable if not required) plus 20mm knockouts, and is divided into three compartments. Mounting holes are also provided in the bottom face. The bottom section can be installed during building works (including in cast concrete floors), the top section screws in later, and has height adjustment of up to 18mm with set screws for levelling. The lid is hinged along the long edge, and is in itself a shallow tray – designed to allow a piece of carpet or wood trim (approx 5mm thick) to be inserted so as to match the lid to the remainder of the floor. Two moulded flaps are incorporated in the edge opposite to the hinge, which can either be locked shut when the box is not in use, or open to allow cables to enter. In this position they are locked so cannot partly close and trap the cables. Usable aperture with lid fully closed 12mm x 43mm per flap.

Internally, a sub-frame allows the mounting of three connector or blank plates, as required. The plates lie parallel to the floor. Various pre-punched plate options are available to suit most common requirements, but note that plates suit either centre positions or end positions within the box, but not both. The basic box includes all hardware, and is supplied without any connector plates, which are ordered separately. Note there is no provision in these boxes to maintain segregation of services. If this is required, then it will be necessary to use more than one box.

Stock code Positions Details
49-682 Centre Blank plate
49-685 Centre Four universal series connectors (e.g. XLR, jack, BNC etc). Connectors not included – see Universal series connectors). Note maximum clearance between front of connector and underside of lid is 28mm, so check mating connector body plus cable length will fit. Normally only BNC’s and right angled XLR or jack connectors will fit in this clearance. For longer bodied connectors use 49-686.
49-689 Centre As 49-685 but high density version for eight connectors. If XLR type are used, mating right angled connectors MUST use the 45° keying facility, with four set each way (see illustration).
49-688 Centre Angled plate punched, for four universal series connectors, two at each end of a recess; two cables exit one direction, two the other.
49-690 Centre Flat plate punched for two Euro connector modules (50mm x 50mm). Connector modules not included.
49-683 Ends Two unswitched 13A mains sockets (fitted)
49-686 Ends Angled plate punched for two universal series connectors. Clearance (along centre line of connector) between front of socket and underside of lid is approx. 100mm.
Dimensions: Bottom section (flanges removed) – 303 x 204 x 59mm.
Wooden floor cutout (if back box fitted before top surface laid) – 300 x 200mm.
Minimum clearance required below floor surface – 73mm.
  Bezeichnung Preis €
zzgl. MwSt.
Hinzufügen
Versand
CANFORD FLOOR BOX Artikelnummer: 49-681
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
95,92 €
CANFORD FLOOR BOX Blank plate Artikelnummer: 49-682
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
10,95 €
CANFORD FLOOR BOX Four universal socket plate Artikelnummer: 49-685
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
11,49 €
CANFORD FLOOR BOX Eight universal socket plate Artikelnummer: 49-689
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
11,88 €
CANFORD FLOOR BOX Angled four universal socket plate Artikelnummer: 49-688
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
12,25 €
CANFORD FLOOR BOX Two Euro 50mm x 50mm aperture plate Artikelnummer: 49-690
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
11,49 €
CANFORD FLOOR BOX Mains socket plate (with sockets) Artikelnummer: 49-683
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
19,45 €
CANFORD FLOOR BOX Angled two universal socket plate (end positions) Artikelnummer: 49-686
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
15,97 €