KLARK TEKNIK DI BOXES
Klark Teknik has a reputation for providing signal processing equipment of the highest quality. The company's innovative electronic designs, sophisticated production techniques and stringent quality control ensure products of outstanding sonic quality and reliability. The products have a strong following in sound reinforcement, broadcast, recording and post production studios and permanent installations.
DN100 DI Box
A single channel DI box for stage use, with a rugged aluminium case protected by a silicone rubber casing, which is available as a spare part. The unit is powered by 48V phantom power via the unit's balanced transformer isolated, 3-pin XLR output. Input on XLR and 6.35mm jack, with front panel link jack. Earth lift and 30dB pad switches are provided and there is a security slot for a security cable to be fitted to this desirable unit. A Kensington lock is provided for additional security.
Input type: Active electronic, balanced or unbalanced. Impedance: 1Mohm nominal, 6.35mm jack; 20kohm, 3-pin XLR/RCA (phono). Maximum level: +40dBu, with pad. Attenuator: 30dB pad. Output type: Transformer balanced. Impedance: 75ohm. Maximum level: 10dBu, with load over 2kohm. Minimum load: 600ohm. Noise: -100dBu, 20Hz to 20kHz unweighted. Frequency response: 20Hz to 20kHz, +0.5/-1dB. Dimensions: 145 x 106 x 60 (LxWxH)mm. Weight: 0.8kg
This is a stereo DI box designed for stage use. Both left and right inputs are by way of 6.35mmTRS/3-pin XLR combination inputs or RCA (phono). Both XLR and RCA (phono) inputs are 20kohm whilst the high impedance 6.35mm TRS jack input is 1Mohm. Outputs are by way of 3-pin XLR and have independent phantom powering. A global pad switch alters the input signal by 20dB, with both sum and split options available on separate push button switches. DN200 also has an earth lift switch to eliminate unwanted hum and/or noise.
Input type: Active electronic, balanced or unbalanced. Impedance: 1Mohm nominal, 6.35mm jack; 20kohm, 3-pin XLR/RCA (phono). Maximum level: +30dBu, with pad. Attenuator: 20dB pad. Output type: Transformer balanced. Impedance: 75ohm. Maximum level: 10dBu, with load over 2kohm. Minimum load: 600ohm. Noise: -100dBu, 20Hz to 20kHz unweighted. Frequency response: 20Hz to 20kHz, +0.5/-1dB. Dimensions: 143 x 106 x 59.2 (LxWxH)mm. Weight: 0.95kg