A range of loudspeakers from LD Systems that have been designed for use indoors or outdoors in hotel lobbies, outdoor bar area, or retail store. Options are available for low impedance or 70/100V line systems.
MAUI i1 - Column loudspeaker
Available in black or white options, MAUI i1 is a passive column type loudspeaker that operates at 70V or 100V line, or 8ohms when the transformer is bypassed. 70/100V line taps include 60/30/15/7.5W with adjustment via a rotary switch located behind the removable cable inlet panel on the rear facing panel. When using at 8ohms the speaker provides 120W RMS (480W peak) with an SPL of 94dB at 1W/1m, and 116dB maximum.
The loudspeaker houses 9x 3-inch mid-range drivers with weather treated cones, and 2x 1-inch neodymium tweeters. A weatherproof connection panel which gives access to the 4-pin terminal block connection, allows an IP65 rating, whilst the aluminium grille ensure the cabinet remains rust free. An included u-shaped bracket allows for surface mounting.
Frequency response: 130Hz - 19kHz. Crossover frequency: 2500Hz. Dispersion (HxV): 120 x 30 degrees. Dimensions (HxWxD): 985 x 85 x 105mm. Weight: 8.6kg.
DQOR 3 - 3-inch, 8ohm
Available in black or white and supplied as a pair, DQOR 3 is a passive loudspeaker for indoor or outdoor use. The 2-way speaker has an IP65 rating and features a 'corrosion-resistant' aluminium grille, 3-inch weather treated paper cone woofer, and 1-inch neodymium high frequency driver. A frequency response of 85Hz to 20kHz and SPLs of 80dB at 1W/1m and 98dB maximum are complimented by a dispersion of 120 x 80 degrees (H x V) at -6dB. RMS output is 30W and peak power is 60W. The included surface mount bracket allows positioning of up to 27 degrees tilt and 45 degrees horizontal swivel. Connection is via 4-pole terminal block housed within the surface mount bracket, which also acts as signal inlet.
Dimensions (HxWxD): 180 x 114.6 x 180.8mm. Weight: 1.4kg
DQOR 3 T - 3-inch, 70/100V/16ohm
These loudspeakers have the same attributes as DQOR 3 however they operate at 16ohms low impedance, or on 70/100V line with taps of 30/6/3/1.5W. DQOR 3 T is available in black or white finish. Weight: 2.1kg.
DQOR 5 - 5-inch, 8ohm
Available in black or white and supplied as a pair, DQOR 5 is a passive loudspeaker for indoor or outdoor use. The 2-way speaker has an IP55 rating and features a 'corrosion-resistant' aluminium grille, 5-inch weather treated paper cone woofer, and 1-inch neodymium high frequency driver. A frequency response of 74Hz to 20kHz and SPLs of 84dB at 1W/1m and 105dB maximum are complimented by a dispersion of 120 x 80 degrees (H x V) at -6dB. RMS output is 70W and peak power is 140W. The included surface mount bracket allows positioning of up to 27 degrees tilt and 45 degrees horizontal swivel. Connection is via 4-pole terminal block housed within the surface mount bracket, which also acts as signal inlet.
Dimensions (HxWxD): 253.8 x 156.7 x 215.3mm. Weight: 2.7kg
DQOR 5 T - 5-inch, 70/100V/16ohm
These loudspeakers have the same attributes as DQOR 5 however they operate at 16ohms low impedance, or on 70/100V line with taps of 70/30/15/7.5/3W. DQOR 5 T is available in black or white finish. Weight: 3.9kg.
DQOR 8 - 8-inch, 8ohm
Like DQOR 3 and DQOR 5, DQOR 8 passive loudspeaker is available in black or white and supplied as a pair, and designed for indoor or outdoor use. The 2-way speaker has an IP55 rating and features a 'corrosion-resistant' aluminium grille, 8-inch weather treated paper cone woofer, and 1-inch neodymium high frequency driver. A frequency response of 62Hz to 20kHz and SPLs of 88dB at 1W/1m and 109dB maximum are complimented by a dispersion of 120 x 80 degrees (H x V) at -6dB. RMS output is 120W and peak power is 240W. The included surface mount bracket allows positioning of up to 27 degrees tilt and 45 degrees horizontal swivel. Connection is via 4-pole terminal block housed within the surface mount bracket, which also acts as signal inlet.
Dimensions (HxWxD): 413.9 x 255.8 x 314.6mm. Weight: 5.2kg
DQOR 8 T - 8-inch, 70/100V/16ohm
These loudspeakers have the same attributes as DQOR 8 however they operate at 16ohms low impedance, or on 70/100V line with taps of 120/70/30/15/7.5/3W. DQOR 8 T is available in black or white finish. Weight: 7.2kg.
DQOR WMC - Rubber cover set
A 2-piece set of rubber covers compatible with DQOR models and designed to protect the DQOR wall-mount from dust and debris during building works.