Verkauf : +44 191 418 1198         Email :

Menu

www.canford.de

  • LIEFERUNG AM NÄCHSTEN TAG
    MÖGLICH
  • ENGAGIERTE DEUTSCHSPRACHIGE
    KUNDENBETREUUNG
  • EINZIGARTIGE MÖGLICHKEITEN
    DURCH EIGENE FERTIGUNG
  • KOSTENFREIE TECHNISCHE BERATUNG
    VON UNSEREM EXPERTENTEAM
CANFORD OPTO SWITCHER Mk.2
CANFORD OPTO SWITCHER Mk.2CANFORD OPTO SWITCHER Mk.2

This free-standing unit allows the remote switching of mains powered equipment such as illuminated signs, cue lights etc., while maintaining electrical isolation from the mains. Control is implemented using either a closing contact across XLR pins 1 and 3, or by applying 5-50 volts DC across XLR pins 2 and 3. Switching occurs at the zero-crossing point of the mains cycle, which, together with spike suppression components, ensures that interference is virtually eliminated. Mains input and output connectors are IEC 60320 type C14 and F, with a 20mm fuse on the input line. The control input uses an XLR 3-pin female panel connector.

Mains input: 230V AC
Fuse: 20mm, 6.3A (T) HRC (stock code 42-275)
Mains output: 1.5kW
Contact closure output: 5V DC at <1mA (close to switch load on)
DC input: 5-50V DC (pin 2 positive) (high to switch load on)
50V DC at <2mA
Control to mains isolation: 1.5kV
Dimensions: 107mm x 93mm x 50mm
Weight: 320g

Mating connector stock codes:

IEC mains input: 42-051
IEC mains output: 42-054
XLR control input: 41-032
Application note:

Although primarily for switching incandescent lamps, it can easily be adapted to switch LED Lamps by cutting an internal link.
The switcher can supply a current of up to 8mA when switched off, so it may not be suitable for driving very light loads e.g. some LED lights etc.

WARNING: THE CASE IS CONNECTED TO MAINS EARTH - ALWAYS USE MAINS EARTH!

  Bezeichnung Preis €
zzgl. MwSt.
Hinzufügen
Versand
CANFORD OPTO SWITCHER Mk.2 Artikelnummer: 42-6701
Bitte einloggen um den Lagerstand und die Verfügbarkeit abzufragen
172,58 €