CANFORD MDU18 WECHSELSTROMVERTEILER - 12x IEC Ausgänge mit IEC durchgeschliffenem Eingang, Strommessgerät
Professionelle 12-fach Nezverteiler mit 10A IEC durchgeschliffenem Eingang, in einem kompakten 19"/1 HE Rackgehäuse.
Alle Versionen besitzen ein Amperemeter mit einem leicht lesbaren Display zur Überwachung der Stromaufnahme.
Ein bedruckbarer Beschriftungsstreifen mit aufschnappbarer Abdeckung und eine Kabelführung gehören zur Standardausstattung.
Diese Schutzplatten können auf Canford MDU-Produkten während der Installation oder nachträglich befestigt werden. Sie verhindern das versehentliche Ein- oder Ausschalten der Einheiten. Die zentrale Öffnung ermöglicht eine Bedienung mit einem Finger und bietet eine klare Sicht auf den beleuchteten Schalter. (Unterschiedliche MDU-Einheiten benötigen unterschiedlich große Schalterschutzeinheiten.)
CANFORD MDU18 AC MAINS POWER DISTRIBUTION UNIT - 12x IEC outlet - IEC inlet with IEC loop-out, current metering
This range of twelve-way, IEC outlet, AC mains power distribution panels with a 10 amp IEC inlet and IEC 'loop-out' outlet, is housed in a compact 1U rackmount case. The loop-out feature provides an un-switched, direct loop-through power outlet to supply equipment that must remain powered when the MDU is switched off, or to supply to a second MDU. All versions have on the front panel a current meter plus fuse and bi-colour LED indication of power status for each of the output channels. Switch option models have an illuminated power rocker switch. Inlet and outlets are on the rear panel.
NOTE: Current drawn from the ‘loop-output’ must be included in the total current calculation. Care must be taken not to exceed the maximum total load of the MDU.
The fuses on the front panel have adjacent bi-colour LEDs. Green illuminated indicates that the circuit is powered correctly. Red illuminated indicates that the fuse has failed.
All outputs are numbered front and rear for easy identification and a designation- strip holder with snap-on cover is fitted on the front panel. The paper strips supplied may be inserted before or after installation; 7.5mm of printable height is available. Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website.
Spare designation-strip inserts (not suitable for printers) 45-3082 and spare clear covers 45-3092 are available.
The front panel has an illuminated switch or is un-switched, independent outlet fuses with status indicators. The rear panel has a 10 amp IEC inlet , 10 amp IEC 'loop-out' outlet and twelve 10 amp IEC outlets. An earth stud is fitted.
Features by model
All types are available with Dawn Grey or Black front panels, and optionally with either red or green illuminated switch.
As IEC cable plugs vary enormously in size and design it is not possible to define a 'universal' connector wire retaining clip. To overcome the challenge of securing all IEC connector types both re-wireable and moulded, a single lacing-bar is fitted as standard. The stainless rods may be fitted in a variety of positions to take account of cable connector size. An additional rod may be ordered separately and fitted, which is particularly suitable where connectors of different heights are inserted or where excess cable must be doubled back. An example would be when 'double ended', fixed length, moulded AC mains cords, such as the IEC-Lock types, are used.
Mating connectors are NOT included and should be ordered separately as required.
Input connectors: Bulgin, stock code 42-154, Schurter, stock code 42-051 or IEC-Lock, stock code 42-3200.
Loop-out connectors: Bulgin, stock code 42-153 or Schurter, stock code 42-054.
Output connectors: Bulgin, stock code 42-153 or Schurter, stock code 42-054.
Moulded mains leads: A large range are offered, see AC Mains Power Leads.
Locking, moulded, mains leads: Patented, locking IEC leads, see AC Mains Power Leads - IEC-Lock or see AC Mains Power Leads - IEC-Lock+.
Switch guard plates, see below. Additional lacing bar kit.
|Maximum outlet load:
||10A per outlet
|Maximum total load:
||10A, including loop-out
||10A (T) HBC ceramic, to BS EN 60127
|Maximum in-rush current:
||100A (MDU-S versions)
Dimensions and weight:
All types are 1U, 19-inch rack mounting, 44 x 483 (h x w) mm.
Switch Guard Plates
A switch guard-plate may be fitted at the time of installation or retrospectively to Canford MDUs to avoid units being accidentally switched off (or on). The central cut-out gives finger access and a clear view of the illuminated switch. Note: Different types of MDU require switch guards of different sizes, see information in descriptions.